Rides

All posts in “Rides”

2023 Chevrolet Corvette Z06 production numbers increased

The headlines say Chevrolet has re-opened order books for the 2023 Corvette Z06 after closing them in July. Those headlines should come with asterisks. What the small print explains — and should have always explained, even here — is that GM gatekeepers lowering the drawbridge means practically nothing for anyone who didn’t get on a dealer list a long time ago. When GM stopped taking orders in July, it stopped taking names off of dealer’s lengthy lists of reservation holders. The production process seems to be going better than planned, so “re-opening the order books” means GM has increased the number of cars it plans to build for the 2023 model year and has asked dealers to submit more names for orders to fulfill. A GM spokesperson told Motor1, “We had previously shared with dealers and the public that we had accepted enough Z06 orders to fill the number of Z06 production slots we had for calendar year 2022, so we stopped elevating dealer orders to accepted orders that the plant would build. Now we are saying we’re going to accept more dealer orders to continue filling the pipeline of Z06 production through the end of model year 2023.”

We don’t have any details to explain any of this nor put it in context. GM didn’t reveal its initial production estimate, and it hasn’t said how many orders it will add to the previous mysterious number. It was thought GM’s conservative production window had to do with a supply constraint, but even that’s not clear. We don’t know how many reservations there are, either, although a thread at Mid-Engined Corvette Forum lists more than 100 dealers and suggests just eight of them have easily more than 6,000 reservations combined. One dealer would only say its reservation list was “out to 2025.”

GM built 39,940 of the C7 Z06 from 2014 to 2019, averaging a touch under 8,000 units per year. Dealers know this, so for one to say they’re booked until 2025, the order rolls must be relatively staggering. There’s no reason for dealers to be in a hurry to get cars built, either, with some charging anywhere from $35,000 to $100,000 over the base $106,395 MSRP per vehicle according to posters.

As for verified production, Corvette Blogger wrote a week ago that 41 customer Z06 orders have been built as of the end of October, 22 of them the 70th Anniversary Editions. On top of that, it’s said 216 Z06s have been built for GM’s Captured Test Fleet used for proving and data capture. The first customer deliveries have been made, including Rick Henderson acquiring the first one off the line, a Carbon Flash 70th Anniversary Edition he bought for $3.6 million at a charity auction in January of this year.

November 7, 2022 / Comments Off

1008

Maurizio Reggiani talks racing, forced induction, and Lamborghini V12s

Maurizio Reggiani deserves his own chapter in Lamborghini’s history.

He joined the Italian company in 1995 and rose to the position of chief technical officer in 2006; he notably led the development of some of Lamborghini’s greatest modern-day engines, including the 6.5-liter V12 that powers the Aventador. His time as the head of Lamborghini’s research and development department ended earlier in 2022 and he now serves as vice president of motorsport. His successor, Rouven Mohr, is tasked with implementing an ambitious and far-reaching electrification strategy called Direzione Cor Tauri and outlined in 2021.

As Lamborghini prepares to enter a new era, I sat down with Reggiani for a behind-the-scenes look at nearly 30 years of V12 development.

[The following has been edited for clarity.]

RG: Lamborghini has made other engines and other companies have made V12s. Why is the V12 so often associated with Lamborghini?

MR: In a time when everybody started talking about downsizing and reducing cylinder count, we continued to say that the V12 is the flagship of the super-sports car. We were born with this: Lamborghini has made a V12 during every year of its history. We also did V8s in the time of the Jalpa, for example, but the V12 was every time the main pillar of this company. If you want to be considered the pinnacle of super-sports cars, no other engine can really speak to purists like a naturally-aspirated V12 can. In terms of power, in terms of sound, in terms of emotion, and in terms of, let me say, the coolest engine that’s possible in terms of engineering definition.

RG: What projects have stood out to you during your time at the head of Lamborghini’s R&D department?

MR: When I started my career, 40 years ago at Maserati, I worked in engine development. At Bugatti, I was responsible for powertrain, which of course includes the engine. For me, an engine is kind of like a first love, and you remain in love for all of your life. To look at an engine, to look inside, to discuss the components, to have an opinion, and to give a suggestion was my way of working every time.

One of the projects that excited me the most was the Diablo GT. For the first time, we decided to put a single throttle per cylinder, and it was a level of sophistication that was more or less never used before by Lamborghini. You take experience from the past and try to apply it to [the present]. This improved a lot the performance, and it was really super exciting. The engine in the Aventador is another highlight: it was designed together with the Aventador. That was a completely new car, we started from scratch, and you can imagine how exciting that was.

RG: You’ve taken the V10 racing; why not race a V12?

MR: We had a big discussion about this when we first started out in racing. We initially launched a one-make series in 2009, and after that we decided to also engage in the GT3 series, and the main point of discussion was that in every competition related to GT you have a balance of performance. There’s no sense to take on the weight and packaging of the V12 if after you need to put a restrictor that penalizes a lot of the performance. We decided the best compromise in order to match the balance of performance was the V10. At the end, you need to take an engine where even with the balance of performance you are close to maximum power. If you take an engine with a big output and you move its curb of efficiency to a lower part [of the graph], you cannot be competitive.

RG: Was adding forced induction, whether it’s a turbocharger or a supercharger, ever considered?

MR: We never [used forced induction] because our vision was that the sound of the V12, the frequency of the V12, cannot be done with a turbo. Clearly, today you have so many filters in the exhaust system that the sound is reduced. That are new rules that came from California where you cannot exceed a given decibel during the test. Years ago it was only in the default [driving] mode; now in all of the modes you need to be below a certain level. It’s important to maintain the frequency of the sound.

Also, the power was, let me say, enough. We reached 350 kilometers per hour (about 217 miles per hour) with the Aventador SVJ. We put much more attention to the use of the power and the shape of the torque curve because we were sure this is what customers ask. We want to give the V12 a response that’s as similar as possible to a motorcycle’s. On a motorcycle, when you twist the accelerator you have the impression that the engine is able to catch 10,000 RPM *snaps* like this. In a V12, which is a big engine, the enemy is to be able to move up and down [the rev range] as quickly as possible. This depends a lot on the weight of the pistons, the connecting rods, the crankshaft, and of course electronics. You need to tune everything as much as possible and what gives this perception is the sound you hear.

RG: I spoke to you about carbon fiber connecting rods in 2016. What happened to that project?

MR: The parts were done in Seattle, at the University of Washington. The complexity in terms of the materials used, the necessity to have metal inside, and the difficulty of bolting the connecting rods because you need to put an insert inside of them [were issues]. And, after that you have dilatation. We built a prototype and tested it but it remained at the research level. We have several examples of development work that run, but at the end every time you need to do a decision sheet where you decide economics, reliability, reproducibility, and cost, and what we work on in R&D can’t reach production every time.

RG: What should we expect from the next V12?

MR: The V12 is part of Lamborghini’s DNA. We already announced the Aventador’s successor will keep the naturally-aspirated V12, though it’s a V12 that is radically new compared to what we have today. We use this new engine to correct some of the peculiarities that can be related to the weight and that can be related to the RPM in order to have the best level of thermal dynamics coupled with a hybrid system.

Related Video

November 4, 2022 / Comments Off

546

Ferrari lifts profit forecast after strong Q3, keeps cautious stance on margins

MILAN — Luxury sports car maker Ferrari said on Wednesday it was improving its forecasts for full-year results, including for core earnings, after beating expectations in the third quarter, supported by a double-digit increase in shipments.

The company however struck a more cautious tone on the margin on those core earnings, now seen at around 35% for this year, versus a previous guidance of over 35%.

It said industrial costs and research and development expenses increased in the past quarter mainly due to higher depreciation and amortization and cost inflation.

Ferrari said its adjusted earnings before interest, tax, depreciation and amortization (EBITDA) would grow this year to over 1.73 billion euros ($1.71 billion), versus an already improved forecast of 1.70-1.73 billion euros it provided three months ago.

After briefly turning positive following the release of the results, Milan listed shares in Ferrari fell as much as 2.4%. By 1235 GMT they were down 1.4%.

In the third quarter, adjusted EBITDA rose 17% to 435 million euros, topping analyst expectations of 418 million euros, according to a Reuters poll.

($1 = 1.0107 euros)

(Reporting by Giulio Piovaccari; Editing by Keith Weir)

Related video:

November 2, 2022 / Comments Off

1743

1,204-hp Hennessey Venom 1200 is the new kingsnake

In 2019, Texas tuner Hennessey Performance did some open heart surgery on a Ford Mustang Shelby GT500, swapping the supercharger on the Mustang’s 5.2-liter Predator engine for two turbochargers. The result waved a fast goodbye to the GT500’s stock 760 horsepower and 625 pound-feet of torque. Available in two outputs and called the Venom 1000 or Venom 1200, the latter made 1,200 hp at 7,000 rpm and 1,000 lb-ft of torque at 4,800 rpm. You know what they say about one good turn, so say hello again to the Venom 1000 and Venom 1200, this time with one (really big) screw instead of two compressors. Hennessey removed the 2.65-liter supercharger from the stock GT500, laying in a 3.8-liter unit. Final specs for the bigger boy are 1,204 hp at 7,600 rpm and 902 lb-ft of torque at 5,200 rpm.

Engineers breathed on the drivetrain from the intake to the exhaust. There’s a new high-flow induction system and intercooler, upgraded belts, fittings, lines, and tensioners, an air/oil separation system and a recalibrated dual-clutch transmission to swallow all that extra oomph. Of course, new anodized billet fuel rails and injectors convey a lot more fuel from tank to nozzle. Speaking of which, the new Venoms can run on pump gas; however, the 1200 will only corral 900 horses on basic premium. They need E85 to get out the whole herd.

The Venom 1200 conversion costs $59,950 on top of the price of a new GT500, a dealer showroom GT500 starting at $80,815 before options and all the rest. The previous Venoms weren’t capped, but the reboots are, Hennessey saying there will be just 66 of them, the number tied to Ford winning the 1966 running of the 24 Hours of Le Mans. Customers who want to make that connection public can check the box for the livery in black, red and white for $4,950. It honors the Ford GT40 Mk II that won the French race. We can’t exactly call these prices a bargain, but they’re a lot less than a similar rework Shelby American’s done to the GT500 and called the Code Red. Going the twin-turbo route, the Code Red makes 1,300 hp and 1,000 lb-ft on E85, or 1,000 hp and 780 lb-ft on pump gas. There are only 30 of them, ten a year for three model years, making them more than twice as exclusive as the Venom 1200. They’re also more than twice as costly, the stewards of Carroll Shelby’s legacy charging $209,995 for the Code Red, which doesn’t include the donor coupe. But the Code Red is sold out, making the Venom 1200 the kingsnake for now.

Related video:

October 31, 2022 / Comments Off

1272

Buy a Ferrari like the one driven by the Sultan of Brunei. It ain’t cheap

A video featuring a very blond blonde and a very red Ferrari? That’s certainly one way to attract some attention.

We don’t have the skinny on the lady, but the Testarossa Spider is straight out of the annals of wretched excess. It goes on the auction block in London next Saturday with opening bids at $1.6 million. The video is a teaser tweet for the event.

According to documentation offered by the auction house of RM Sotheby’s, this 1990 stunner, a “Special Production” Pininfarina-engineered convertible, was part of a custom lot of Ferraris commissioned by a high-roller in the Brunei royalty household. In 2021, when, according to Sotheby’s, it was “revived from its life-long state of static display,” the car was shuttled to two factories in Italy for “restoration.” The cost was 94,300 Euros to repair the top’s latch and repaint the machine. Another 83,170 Euros was budgeted to fiddle with a new clutch and “refresh” the interior. Lay those numbers on your local garage.

It’s believed, the press release goes on to say, that, in the end, Pininfarina made seven almost identical but ultimately unique “Spider” adaptations, “each finished in a different exterior and interior color combination.” And, in addition to these Brunei cars, a very small number of Testarossa Spiders, like the one to go on auction, were built for important clients, including the current consignor, who ordered his (or hers) in 1989. There are a reported 413 kilometers on the clock.

But wait: apparently maestro Pininfarina — perhaps in the throes of an eccentric mood — rebelled back in the Eighties against the convention of assigning just a common 17-digit vehicle identification numbers to his creations, and so identified the car described above with the VIN of “EFG092.” Go figure.

Lotus Eletre electric SUV will rock close to 900 horsepower

Eight hundred and ninety-three.

That’s the announced horsepower of the Lotus Eletre, from the venerable British house of Lotus, and it’s not attached to a difficult-to-climb-into sports car, but a “hyper” all-electric SUV. Other notable numbers: 726 pound-feet of torque, 0-to-62 mph in a hair under 3 seconds, and a top speed of 165 mph.

Due to arrive next summer, the flagship Eletre R is a wild departure from a company that regularly built featherweight cars with no more than 100 horsepower. According to Britain’s Autocar, the most powerful Eletre will cost 120,000 pounds (about $140,000) when goes on sale in the U.K. next summer. It will likely be exported to the U.S. and China as well.

Standard equipment includes active air suspension, torque vectoring, an active front grille, LED headlights and a set of 22-inch wheels. Inside, all Eletres are fitted with electrically adjustable seats, wireless phone charging and four-zone climate control.

Among the Eletre versions are a base model and the Eletre S making 603 horsepower and using a single-speed gearbox. The Eletre R will be the only model with a Track Mode, which lowers the ride height and gives it more aggressive damping.

Lotus, which is owned by the China-based Geely group, was founded 74 years ago by Colin Chapman. Under his direction, Lotus won seven F1 constructors’ titles and six Drivers Championships.

Looking to reserve an Eletre? The Lotus website suggests you contact your local dealer (and offers a dealer locator). Lotus says that the R model is to be the first of four that are to come from the company by 2025,

October 26, 2022 / Comments Off

940

One-of-five Ferrari 288 GTO Evoluzione up for auction

Ferrari doesn’t normally dabble in the mundane, but some of its cars are rarer than others. A perfect example is the 288 GTO Evoluzione, a race car-turned-test bench that the company built five units of in the 1980s. While these rarely come up for sale, one is currently being auctioned.

Many enthusiasts are familiar with the 288 GTO, but the Evoluzione model remains substantially more obscure. Ferrari initially developed it to compete in the Group B rally category’s tarmac events. You didn’t need to be a seasoned car-spotter to tell the Evoluzione apart from the standard 288 GTO: it featured a specific, Pininfarina-designed body made with Kevlar and fiberglass and a carbon fiber rear wing. Power came from a 650-horsepower evolution of the road car’s 2.9-liter, twin-turbocharged V8 engine. Ferrari quoted a top speed of 230 mph.

Had it raced, the 288 GTO Evoluzione could have given Ferrari’s rivals a serious run for their money. It didn’t get the chance to compete because the Fédération Internationale de l’Automobile (FIA) eliminated the Group B class from international rally events in 1986. Ferrari instead used the 288 GTO Evoluzione to test some of the features it later brought to production in the F40, and it’s not a coincidence that several styling cues link the two cars.

Built in 1987, and assigned chassis number 79888, the 288 GTO Evoluzione listed by RM Sotheby’s is the fourth example built. It was finished in 1988 and sold to Belgian pilot Jean Blaton in December of that year. The selling dealer purchased it in 1992 and kept it until a private collector in the United Kingdom bought it in 2006. The car then went through the hands of current Aston Martin chairman Lawrence Stroll, Rick White, David SK Lee, and David Raisbeck. It’s been housed in a private collection located in Europe since 2019.

RM Sotheby’s notes that Italian dealer and repair center Michelotto recently performed a €133,000 (about $130,000) service on this 288 GTO Evoluzione. The list of parts replaced includes the fuel lines, engine oil lines, brake lines, driveshaft boots, seatbelts and windows. Both turbochargers, the water pump, parts of the suspension syste, and the brake calipers were overhauled as well. And the transmission and clutch were serviced, the tires were changed, and the body was repainted in the original Rosso Corsa color.

Act fast if you want it: the auction closes on October 21, 2022, at 6:00 p.m. Paris time (that’s noon in New York and 9:00 a.m. in California). RM hasn’t provided a pre-auction estimate but this won’t be a bargain. The firm sold a standard 288 GTO for $4.4 million in August 2022.

Related Video:

October 21, 2022 / Comments Off

1883

Apollo shows off rolling electric supercar prototype

Apollo is known for building wild supercars with powerful engines and massive acceleration numbers, but the company is making a shift. Apollo just showed off a rolling engineering prototype of a new electric performance car that it says will offer performance and luxury.

The G2J Engineering Prototype has been in development for more than two years, and Apollo says it has teams from across Germany and Japan working on the project, with the German R&D team leading the effort. Apollo is focused on lightweight and composite materials and uses carbon fiber in many parts of the prototype.

Though impressive, Apollo says the prototype does not indicate how its first electric vehicle will look. Instead, the company uses the model to develop aerodynamics and test dimensions for its first electric sports car. Future vehicles will draw inspiration from other Apollo models, like the IE and Project EVO.

Roland Gumpert, the name behind the Gumpert Apollo car that debuted in the early 2000s, formerly owned Apollo before his departure in late 2016. The company has shown several impressive supercars over the years, including the Apollo Arrow and Intensa Emozione shown at Goodwood in 2017. The latter car was built in partnership with the same company that helped Mercedes build the CLK-GTR, HWA AG.

Apollo says it will reveal its first electric sports car concept in the fourth quarter of 2022 but has not given any other details. As far as costs go, the company’s cars have so far not been anywhere near affordable. The Arrow, for example, costs around $1 million, so an all-new electrified supercar won’t be cheap.

Related video:

October 12, 2022 / Comments Off

514

Driving the GMC Hummer EV and Mercedes-Benz EQS, EQE, EQS SUV | Autoblog Podcast #750

In this episode of the Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor, Green, John Beltz Snyder. This week, they talk about driving Mercedes‘ fleet of EQ electric vehicles, including the EQE Sedan, the AMG EQS Sedan and the EQS SUV. They also talk about piloting the Acura NSX Type S. Next, they discuss the reveal of the 2024 Maserati GranTurismo, including the all-electric Folgore trim, as well as the Ferrari SP51 roadster. Finally, they talk about some of the best (including some unusual) car features for kids.

Send us your questions for the Mailbag and Spend My Money at: Podcast@Autoblog.com.

Autoblog Podcast #750

Get The Podcast

Apple Podcasts – Subscribe to the Autoblog Podcast in iTunes
Spotify – Subscribe to the Autoblog Podcast on Spotify
RSS – Add the Autoblog Podcast feed to your RSS aggregator
MP3 – Download the MP3 directly

Rundown

Feedback

Autoblog is now live on your smart speakers and voice assistants with the audio Autoblog Daily Digest. Say “Hey Google, play the news from Autoblog” or “Alexa, open Autoblog” to get your favorite car website in audio form every day. A narrator will take you through the biggest stories or break down one of our comprehensive test drives.

Related video:

October 7, 2022 / Comments Off

2251

Ultra-rare Nissan GTR-50 is up for sale in Canada

Occasionally, a super-weird concept car or rare one-off coach-built model will cross an auction block or sales listing. Their off-the-wall designs and futuristic shapes look cool, but concepts aren’t always drivable. A few years back, Nissan pulled back the curtain on its GT-R50 concept, a coach-built GT-R designed by Italdesign. Instead of the one-off concept going up for sale, the car you see here is one of 50 units Nissan/Italdesign built for the road.

This GTR-50 is offered by Legendary Motorcar in Ontario, Canada. It’s number 11 of the planned 50, though the seller notes that only 19 have been built. Nissan didn’t close the order books until July of this year but hasn’t confirmed the production totals or the number of customer sales.

The GTR-50 was a 50th birthday celebration for the GT-R nameplate and Italdesign, the shop responsible for penning the concept. People became so enamored with the car that Nissan agreed to build a limited run of 50 units. Though it’s immediately recognizable as a GT-R, the GTR-50 is a sleeker coach-built car with more interesting lines and a funky optional rear hydraulic wing.

Nissan modified the car’s twin-turbocharged 3.8-liter V6 engine with turbochargers from a GT-R GT3 car and massaged the internals with beefier pistons, a new crankshaft, and more. Those updates boosted output from the standard car’s 565 ponies (2021 model) to 710 horsepower. Torque climbed to 585 pound-feet, almost 100 more than the standard car, and Nissan updated the six-speed dual-clutch gearbox to handle the power.

Legendary Motorcar didn’t publish pricing for the GT-R50, but it’s a safe bet that it will sell for far more than the vast majority of people can afford. The 50 cars Nissan sold carried a starting price of around $1.1 million, and this car’s odometer still shows delivery mileage. Given the recent excitement (and money) surrounding other rare car sales, this one could be quite a shocker.

October 6, 2022 / Comments Off

676

Lamborghini Aventador Ultimae Roadster ends non-hybrid V12 production

To quote Hall & Oates: “She’s gone,” the “she” here being the Lamborghini Aventador. The last of the scissor-doored supercars with a naturally-aspirated V12 rolled off the line in LP 780-4 Ultimae Roadster form colored an Ad Personam light blue, headed for a quiet life in Switzerland. That also closed the chapter on the 350 coupes and 250 roadsters made in Ultimae spec. This is a belated end-of-life, the Italian concern restarting production lines after 85 Lamborghinis, 15 of them Aventador Ultimaes destined for the U.S. market, got torched on the cargo ship Felicity Ace in March of this year. The final tally for the latest V12 spreadsheet counts 11,465 cars delivered in 11 years, more than doubling the entire sales count of its predecessor, the Murcielago, and exceeding the combined sales of every one of Lamborghini’s V12 models since the 3.5-liter V12 in the 350 GT in 1964.

What began with the 6.5-liter 12-cylinder with 691-horsepower and 509 pound-feet of torque in 2022 ended with that engine making 760 hp and 531 lb-ft in the Ultimae. The official 0-to-62 mile per hour dash came down a tenth of a second in that time, depending on where you look, from 2.9 seconds to 2.8. Top speed rose from 217 mph to 220. Plenty fast then, plenty fast now. Between those yardposts there have been more than 10 one-offs and limited editions. The former group includes the Jota, SVJ Xago, and the SC18 Alston track car. The latter group counts the Anniversario, Veneno, Centenario, and Sian FKP 37. There were also innovations like the enclosed carbon fiber monocoque supported by “flying doctors” that traveled the world to help diagnose and repair damage that benefited owners. There was the pushrod suspension that turned a heavyweight into a flickable canyon runner, benefiting all drivers. There was the Independent Shifting Rod (ISR) single-shift transmission, which Lamborghini says was “chosen for lightweight compactness and the most emotive shift.” Given its tidal shifting motion and occasionally clumsy changes under partial throttle or when trying to figure out what the driver wanted in changing conditions, we never figured out who that benefited.

What comes next will be a hybrid V12 powertrain wrapped in looks that, based on spy shots, will evolve the latest design language with details like new lights, bladed B-pillars, and high-rise exhaust. Shouldn’t be long to wait now. But no matter what comes, to paraphrase Hall & Oates on the Aventador again: There can never be what she was to us.

Related video:

September 28, 2022 / Comments Off

590

Ferrari SP51 is a V12 roadster with gorgeous paint based on the 812 GTS Spider

Ferrari says it spends an average of two years on its one-off Special Project cars such as the SP48 Unica from earlier this year, which was based on the F8 Tributo. Here’s another before the year is out, the SP51 that rides on the bones of the 812 GTS convertible. A Taiwan-based client and collector had the idea and the funds to make it happen, working with the Ferrari Styling Center on a highly advanced and proper roofless roadster that nods to historical Ferrari roadsters as well. A reshaped front fascia houses a black, carbon fiber insert below smaller headlights. Another large section of exposed carbon fiber piece below the windshield reaches forward to the hood vents, framing the center of the hood. Along the flanks, the 812’s upswept sculpting is redirected, scalloped sides rising gently to the middle of the door then descending toward the rear wheels. Above that, a pair of flying-buttress-like cowls help shape the dark lines of rear intakes behind the cabin. A carbon fiber wing runs across the car above the cowls, concealing the roll hoops.

A custom set of rims are set off by carbon fiber wing profiles in the front fenders. In back, the quad taillights peek out from below the decklid spoiler and above the deep, layered diffuser. Ferrari said it took a heap of “CFD simulations, wind tunnel and dynamic testing” in order to imbue the “ultimate in comfort in the cabin, but also the same standard of acoustic comfort and wind feel as the car that inspired it.”

That color seen outside and in is Rosso Passionale, a custom hue applied in three layers. The blue and white stripes running over the body and through the cabin pay tribute to the blue and white livery inspired by a 1955 Ferrari 410 S, an early race car powered by a 5.0-liter V12. A 410 S with chassis number 0592CM shows off that paint scheme, the roadster driven by Carroll Shelby to wins in Palm Springs the year it was delivered to owner Tony Parravano.

The cabin continues the blue and red theme, with Rosso Passionale offset by blue striping and white cross stitching on the instrument panel lower, seats, center tunnel, and doors. It can’t be bought so the price doesn’t matter, making the only real question: Would you have this, or the Ferrari Special Projects roadster from 2014, the F12 TRS?

September 28, 2022 / Comments Off

1720

Delage D12 gets two new open-top treatments, Speedster and F1

Delage spent a long, hot American summer showing its D12 to local audiences. The reborn French brand wants to sell nine cars here and one in Canada, and it seems the job is nearly done, with CEO Laurent Tapie saying seven of the U.S. offerings have been spoken for. Unlike in other parts of the world, American owners will need to import their cars under the Show and Display exemption. Tapie said his company has already starting filling out the forms on behalf of future owners that will compel their D12s to be driven no more than 2,500 miles per year and to be stored in secure locations when not in use. We suspect those prohibitions won’t be difficult for any supercar owner to obey.

It’s possible that Delage’s stirring up the model mix helped move a few more cars. We knew there would be GT and Club versions, a 7.6-liter naturally aspirated V12 sitting behind the tandem cockpit in both. In the 3,086-pound GT, it makes 990 horsepower by itself and is aided by a 110-hp electric motor, sending the combined 1,100 hp through an eight-speed single-clutch automatic to the rear wheels. The Club’s electric motor only adds 20 horses, but the Clubsport is 200 pounds lighter than the GT and faster around a track, its e-motor for street driving, reversing, and parking. A more relevant stat for the Cars and Coffee crowd is a claimed 0-to-60 mph time of 2.4 seconds thanks in part to carbon fiber wheels wrapped in Michelin Pilot Sport Cup 2 R rubber.

The new variation is that the roof can come in three treatments. There’s the standard coupe that’s been shown, joined by two open-top versions. The D12 Speedster turns into a targa, losing the portion of its roof aft of the windshield. The D12 F1 option (pictured) sheds even that full windshield, making do with a wind deflector and a fancy helmet, which will be required when driving. Those options cost $190,000 apiece, but they are modular, so they can be bundled for the low, low price of $260,000.

Delage still plans on production commencing before the end of this year, deliveries to start in the last quarter of next year. Each of the 30 examples Delage will make for global consumption will cost €2 million ($1.94M U.S.). It’s possible that before delivery, Delage will make the Nurburgring passenger car lap record attempt we’ve been hearing about. The Porsche 911 GT2 RS wears the crown now with a time of 6:43.300. Tapie said he wants the D12 to stop the clock at 6:40.

September 26, 2022 / Comments Off

391

An assortment of emblematic supercars is headed to auction

Auction house RM Sotheby’s is giving enthusiasts the chance to bid on the supercars that they had posters of when they were kids. It’s organizing a live sale in Miami, Florida, in December 2022 that’s limited to 60 high-end models built between the 1970s and the 2010s.

The oldest car in the catalog is a V12-powered 1974 Jaguar E-Type, though keep in mind that only 20 of the 60 available slots have been filled so far. At the other end of the spectrum, the newest model is currently a 2014 BMW M5. If your automotive tastes are firmly anchored in the 1980s, there’s a wide selection of cars to choose from such as a 1989 Lamborghini Countach 25th Anniversary Edition and a 1987 Porsche 911 Turbo with a flat-nose conversion. If your heart belongs in the 1990s, RM’s sale includes a 1990 Lamborghini LM 002, a 1995 Ferrari 512 M, and a 1996 Porsche 911 Turbo. Bentley models and a 2008 Mercedes-Benz SLR are among the newer classics.

Carmakers weren’t alone in pursuing speed, style, and extravagance in the 1980s; tuners fought hard for a piece of the pie as well, and RM’s sale reflects that. Collectors will get the rare opportunity to bid on a number of pre-merger AMG models like a 1982 Mercedes-Benz 500SL 5.0 (R107), a 1987 Mercedes-Benz 560SEC 6.0 (C126) with a wide-body kit, and a 1989 Mercedes-Benz 560SEL 6.0 (W126). BMW-based Alpina models are well represented, too: RM accepted a pair of 6 Series-based 1987 B7 coupes and a 3 Series-based B6 2.8.

There are several slots left so it’s not too late to submit your car. If you’re a buyer, plan on being in Miami on December 9 and 10, 2022. We suggest clearing up space in your garage first: every car is offered with no reserve, so the selling price will be the highest bid.

Related Video

September 18, 2022 / Comments Off

646

Pagani Utopia takes things back to basics: V12, manual

Pagani’s latest supercar and successor to the Huayra is here, and its name is Utopia. And everything about it is about getting back to basics and focusing on the driving experience. But don’t take our word for it, that’s what Pagani said its clients wanted: “simplicity, lightness and the pleasure of driving.” So it’s delivering a light car with a big V12 and a manual transmission.

In the middle of the Utopia is a twin-turbo 6.0-liter V12 from Mercedes-AMG, and it makes 852 horsepower and 811 pound-feet of torque. Power goes into an Xtrac-designed seven-speed manual transmission (or automated manual as an option) to a limited-slip differential and the rear wheels. Pagani also seemed to take a dig at Koenigsegg and its manually-shiftable automatic in the CC850: “Moreover, in order to best match the wishes expressed by Pagani enthusiasts, its aficionados, a virtual manual would not be acceptable so a real seven-speed manual transmission has been developed.”

The chassis is a blend of carbon-titanium fiber for the body and passenger compartment with chromoly tube subframes front and rear. Suspension is double-wishbone at all four corners with forged aluminum components. The wheels are also forged aluminum and feature carbon fiber turbine covers that extract hot air. Six-piston front calipers and four-piston rear calipers stop the supercar.

Design-wise, the Utopia looks like a blend of the Huayra and Zonda. It’s very curvy like the Huayra, but the low center section and raised front fenders are reminiscent of that original Zonda. It does of course have many unique cues, particularly the side mirrors that hang off their mounts and the floating taillights. Inside, Pagani has focused on a more traditional look with just a single small screen in the instrument cluster, and analog dials for nearly every other instrument. The manual shifter is fully exposed and sits prominently between the seats. It also features a steering wheel and pedals that have all been milled as single pieces from aluminum.

Pagani will build just 99 Utopias in the initial run, and they’ve all been sold. No price was given, but it was surely astonishingly high.

Related video:

September 12, 2022 / Comments Off

799

Williams Advanced Engineering reveals EVR electric hypercar platform

Deus announced its Vayanne electric hypercar earlier this year as conceived in Austria, designed in Italy, and electrified in the UK. That last bit refers to the battery-electric powertrain sourced from Williams Advanced Engineering (WAE), which we now have more information on. WAE took its new EVR turnkey electric vehicle platform to the Cenex Low Carbon Vehicle Show for a full reveal. Designed specifically for hypercars, the targets were versatility, lightness, power and speedy recharging. It appears the only fixed element for the time being is the 85-kWh battery set into a carbon housing between the wheels, and two motors. WAE says it can be refilled in less than 20 minutes, and powers a range of up to 279 miles. After that, OEMs and boutique makers can choose rear-wheel drive or all-wheel drive, hardtop or targa body styles, and road-legal or track-only configurations.

Peak output is 2,213 horsepower from the dual motors, explaining Deus’ publicized target of more than 2,200 horsepower for the Vayanne earlier this year. Depending on body style and aero, WAE believes the platform could push a hypercar to 248 miles per hour given an ideal form. We’re told it will be possible to build a finished product with such specs that weighs less than 3,637 pounds, carbon being used for everything from the pack enclosure to the double wishbone suspension. For comparison, the 640-hp Porsche 911 Turbo S weighs 3,636 pounds.

The list of in-house innovations on the EVR chassis includes a Scalable Battery Module that opens up flexibility for custom packs and sub-pack systems, controlled by battery management software that rationalizes the amount of electronics needed to run the powertrain. The company says each module has a capacity of 1.08 kWh at 50 volts maximum or 43 volts nominal, and an energy density greater than 240 Wh/kg. The individual cells are wrapped in carbon fiber, too, claimed to improve crash resistance. Battery cooling is run through the energy-absorbing side sills.

Theoretically, a purchaser could cut prototype development time to 12 months, and entire vehicle development time to 24 months. The Vayenne will provide the first test, Deus having said it will go into production in 2025. WAE has a hydrogen fuel cell version of the EVR on the way next.

Related video:

September 9, 2022 / Comments Off

606

Ferrari teases Purosangue exhaust note before September 13 debut

We’ve been talking about a Ferrari SUV for more than five years, when ex-CEO Luca de Montezemolo said the Maranello automaker would never build one and then was let go not long after. We’ve known there would be a Ferrari SUV for four years, when the brand’s product road map ID’d what would come to be nicknamed the Ferrari Utility Vehicle. Barring a late switcheroo, we’re betting on the official name to be Purosangue. During a year of teasers and spy videos, at last, we have less than a week to see what all the fuss has been and will be about. On September 13, Ferrari shows its new four-door, four-seat family car, and teased the arrival with a clip of the exhaust note.

You heard it here first.
More will be revealed on the 13th of September.#FerrariPurosangue #Ferrari pic.twitter.com/xQOTpdJBiM

— Ferrari (@Ferrari) September 6, 2022

Although muted, we expect that sound to be emerging from a naturally aspirated V12, the engine CEO Benedetta Vigna confirmed the Purosangue will offer. It’s possible Ferrari’s twin-turbo V8 will join the options, but we don’t know if or when that happens. With spy videos showing what appears to be a slightly lifted wagon-esque form, the Purosangue’s focus on road manners could vault it to the top of the competitive set in the horsepower column. The company’s 6.5-liter V12 makes 819 horsepower in the 812Superfast, easily besting the 697 in the Aston Martin DBX 707 and the 657 horses in the Lamborghini Urus Performante. Even Ferrari’s twin-snail V8 would clear the bar, that engine producing 711 hp in the F8 Tributo. Or, it’s possible Ferrari could turn the wick way down, aligning the Purosangue with its tourers, the 611-hp Roma and 612-hp Portofino M convertible.

Sounds like no matter the specs, the Purosangue won’t be the easiest Ferrari to get into for reasons beyond the current industrial snarls. A Ferrari presentation during Capital Markets Day this year explained the Purosangue’s “yearly average contribution to shipments will remain below 20% over its lifecycle.” Volume that low indicates a cap enforced by the company; SUVs introduced among other super sports car makers have run directly to the top of the brand’s sales charts. We will not be surprised to see that figure rise in the coming years, or Purosangue’s being flipped for obscene amounts over its entire run.

It’s quite the month for lusty cars, the Pagani C10 debuting the day before the Ferrari, the seventh-gen Ford Mustang arriving the day after.

Related video:

September 8, 2022 / Comments Off

1987

Pagani C10 teased before September 12 debut

The third movement in Pagani’s symphony of supercars is headed our way in an online debut from Milan come September 12. It’s called the C10 for now, which could be a provisional name, its full final name, or a portion of the final name; the Zonda that put the Modena manufacturer on the map launched as the Zonda C10, the codename for the Huayra during development was C9. Pagani posted another teaser of the coupe to Facebook, finally giving us hints of the thing in the, er, carbon fiber. The only surprise we can make out so far is the headlight treatment. Previous products have placed each light element in its own pod, the Zonda boasting three, the Huayra two. The C10 tucks its two headlight beams together under a clear cover.

The good news beyond that is the return of the manual transmission, which wasn’t available on the Huayra. Eponymous founder Horacio Pagani is said to have discovered that some customers passed on buying a Huayra because of the omission. The C10 tease shows the six-speed row-your-own perched between the front seats, its linkage exposed like we used to see on Spykers. Note, the Huayra shifter featured an exposed linkage, but its rods and springs connected to an Xtrac seven-speed sequential gearbox. The C10 will offer a sequential transmission for those who want it.

Another AMG-sourced 6.0-liter V12 sits behind the cockpit, said to have been upgraded from the unit in the Huayra. The former car made 730 horsepower and 738 pound-feet of torque. The special edition Pagani Codalunga made 840 hp and 811 lb-ft. The C10 is expected to produce in the area of 880 horsepower and about as much torque.

The rest we’ll find out about next week. Spy shots of prototypes show what looks like a tasty blend of Zonda-specific cues within the overall flowing shape that recalls the Huayra. The front intake looks more like a Zonda, as do the scoop-less rear fenders and the triple taillights set at an angle in the rear fascia. The almost uninterrupted flow from front to rear, and the tailless rear end are all Huayra. The return of side view mirrors looking like lazy leaves and quad exhaust tips inset in a round opening establish more continuity. It’s possible the car goes back to the traditional door openings of the Zonda, forsaking the gullwing apertures of the Huayra. Pagani said the focus of this car has been weight reduction and handling, so we shouldn’t be surprised to see a curb weight below the 2,976 pounds of the Huayra.

There are only going to be about 300 C10s among all variants — coupe, convertible, and special editions — and every one has been sold. As if that weren’t the case with just about every seven-figure car nowadays, those of means will be especially keen to get in here since it’s thought to be the last pure combustion Pagani before the firm moves into electrification.

Related video:

September 8, 2022 / Comments Off

711

Ducati Streetfighter V4 Lamborghini is a two-wheeled Italian mashup

Ducati has revealed its new two-wheeled mashup with parent manufacturer Lamborghini. The Ducati Streetfighter V4 Lamborghini follows in the footsteps of the 1260 Diavel, this time drawing on the Huracán STO, bringing together two Italian icons with common stylistic elements for a limited run of bikes designed for those who need as many romantic ponies as possible in their garage.

For the latest tie-up, Ducati says it applied its well-known “Fight Formula” to the existing Panigale V4 S (the latest Streetfighter makes 208 horsepower and 90 pound feet of torque) and then took it a step further, integrating styling elements that are “unmistakably Lamborghini.” Depending on which generation of Lamborghini you grew up with, that could mean just about anything. Remember the ’80s? Like, all of them? But in this case, Ducati and Lamborghini settled on a mix of modern styling and heritage inspiration.

Just about every part on the bike was at least breathed on if not outright redesigned. From the wheels, which are bespoke to this model, to the fender design meant to evoke the STO’s air intakes, virtually everything you see is unique. Many of the smaller bits are made from carbon fiber (including the tail, tank cover and toe caps) and the STO emblem is displayed subtly (believe it or not) on its flanks.

The livery includes the #63 (as on the Diavel) in a nod to the year of Automobili Lamborghini’s founding. That’s also the number Ducati used to determine the number of units it would produce: divide 630 by 10 and voila. Ducati says it will also offer an even more-limited series of one-off designs for (you guessed it!) 63 lucky Lamborghini customers who will get the opportunity to match their bikes to their existing (or forthcoming) cars.

Related Video

September 2, 2022 / Comments Off

635

Ariel Hipercar is battery-electric, 1,180-hp madness we love

Five years ago, English motorbike- and speedster-maker Ariel showed a new concept chassis called, at the time, the Hipercar. It was planned for sale in 2020 with a gasoline-electric hybrid powertrain built around a small turbine sending electricity to a lithium-ion battery pack and then on to in-wheel motors. Development was more challenging than expected, and the world hit a few rocks in the road as well. But at last, the first production-intent Hipercar prototype is here, still named Hipercar — which stands for “High Performance Carbon Reduction.” The powertrain is easier to explain than the looks, so let’s start there. Base spec would be a liquid-cooled 62.2-kWh battery supplied by Cosworth powering two radial, inboard Equipmake APM motors fitted to the rear axle. Each motor produces 295 horsepower and 332 pound-feet of torque with total output being 590 hp and 664 pound-feet of torque.

An all-wheel-drive version slots two more radial e-motors into the front axle, doubling output to 1,180 hp and 1,328 lb-ft. Range on battery charge alone is said to be 150 miles. On track, Ariel says a full charge should last for about 20 minutes of full-on circuit driving. If desired, buyers can opt for the miniature turbine range extender also sourced from Cosworth. The catalytic generator (CatGen) turbine makes another 47 horsepower and can accept pump fuel, racing fuel and synthetic fuel. Ariel says it’s targeting a 0-60 mph time of 2.09 seconds with this powertrain.

What sits atop all of that is a laser-cut and CNC-folded aluminum tub attached to aluminum subframes front and rear, with aluminum wishbones supporting a Bilstein adjustable suspension. The 20-inch forged or composite staggered wheels wear Michelin Cup2 or Cup2R rubber in the widest spec ever fitted to an Ariel, at 265/35 in front and 325/30 in back. Behind them are 14.5-inch composite brake discs on the front hubs with six-piston AP Racing calipers, and 12.9-inch discs in back with four-piston calipers. An on-off switch controls the regenerative braking system.

As for the body, the prototype wears 3D-printed panels, production models will get a carbon fiber skin. Company boss Simon Saunders said “An enormous amount of aerodynamic work has been carried out for both drag and downforce, and cooling.” The cabin contains rollover protection. The dual-level wing in the front fascia adds downforce, the fins on the front fenders direct air around the side mirrors, the roof scoop sends air to the microturbine, and the fins on the rear fender aid stability. Its long front, stubby back and central fin, and canopy entrance make it reminiscent of the McMurtry Speirling. Total vehicle weight is said to be 3,186 pounds.

The Hipercar’s gestation is almost as wild as the coupe itself. The UK government has thrown huge money behind EV development in an effort to reach its Net Zero goal for carbon emissions by 2050. Obviously, this will require affordable zero-emissions vehicles for the populace, not seven-figure track-day specialists shrink-wrapped to fit two people, so the Hipercar could come off as dumping public money on a fun little lark. However, this is about getting the big guys and the little guys in a room together to figure out how to produce innovations that work on a mass scale. Saunders explained it well to Autocar, saying, “So on one side you’ve got Mr. Boffin who has a high concept for a widget. On the other side, you’ve got, say, Ford Motor Company. They’re never going to talk to him and he’s too scared to talk to them. So Innovate UK is putting money into Ford but it’s also putting money into Mr Boffin, who takes his idea up to the next level, then the next level, and then goes into low-volume widget production. He sells us 100, he sells Caterham 400, he sells 1000 to a coach manufacturer. He’s now making a few thousand. And then Ford might say, “Could you do 10,000 for a low-volume Transit?”

Saunders gave another example of how the Hipercar has challenged the much larger partners in the various groups Ariel is a part of. “I said to Dave Greenwood, the guy running the project for the Warwick Manufacturing Group, that I felt a bit out of place and he said: ‘No, you’re brilliant because you’re the worst case scenario; you want most performance, least weight, highest range, you haven’t got any money for tooling and you want it really cheap, so if we can satisfy you….’

“Eventually, the aim is that we all win. Before then, the Hipercar is about two years away, aimed at a monied few for a price no more precise at the moment than “under £1 million” ($1.2M U.S.). That will be “excellent value for money” in Saunder’s words, considering the expected performance. Perhaps better for future owners, Ariel has focused on reliability. “With the [Ariel] Atom and Nomad we give you the keys and say bye-bye,” Saunders said. “We don’t want to see it again until it’s time for service. The same has to be true for Hipercar.”

Related Video:

September 2, 2022 / Comments Off

488